| Customization: | Available |
|---|---|
| Usage: | Small-sized LCM |
| Touch Screen Type: | Capacitive |
|
Still deciding? Get samples of US$ 33/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
7.0 Inch 800x480 STM32 RGB Controller Driver Board Capacitive Touch LCD Display
Product Specification:
| Name | Parameter |
| Display Color | RGB888 16.7M (compatible with rgb5665k) color |
| SKU | 800x480:MRG7101(no touch), MRG7111(have touch)
1024x600:MRG7102(no touch),MRG7122(have touch) |
| Screen Size | 7.0(inch) |
| Type | TFT |
| Driver IC | None |
| Resolution | 800*480 or 1024x600 (Pixel) |
| Module Interface | 24Bit RGB parallel interface |
| Touch Screen Type | Capacitive touch screen |
| Touch IC | FT5426 |
| Active Area | 800x480: 153.84x85.63(mm)
1024x600: 154.21x85.92(mm) |
| Module PCB Size | 164.90x124.27(mm) |
| Operating Temperature | -10ºC~60ºC |
| Storage Temperature | -20ºC~70ºC |
| Input Voltage | 5V |
| IO Voltage | 3.3V |
| Power Consumption | 800x480: 67mA(The backlight is off), 467mA(The backlight is the brightest)
1024x600: 104mA(The backlight is off), 310mA(The backlight is the brightest) |
| Rough Weight(Net weight) | 236(g) |
Hardware Description:
1) --DITHB selection circuit
2) --U/D selection circuit
3) --L/R selection circuit
4) --Screen resolution selection circuit
5) --P2 interface (compatible with atomic RGB interface)
6) --P3 interface (compatible with wildfire RGB interface)
1. Screen internal Dithering display function settings
Weld the 0 position resistance of DITHB and disconnect the 1 position resistance to enable the internal Dithering display function of the display panel;2. Screen display up and down flip settings
Weld the resistance at position 0 of U / D, disconnect the resistance at position 1, and the screen will turn down;3. Screen display left and right flip settings
weld the resistance at position 0 of L / R, disconnect the resistance at position 1, and the screen will turn to the left;4. Screen resolution selection
As shown in the screen resolution selection circuit, the module supports screen switching of 800x480 and 1024x600 resolutions.5. P2 and P3 interface pins are described as follows:
| Number | Pin name | Description |
| 1 | VCC5 | Power input pin(connect to 5V) |
| 2 | VCC5 | Power input pin(connect to 5V) |
| 3~10 | R0~R7 | 8-bit RED data pin |
| 11 | GND | power ground pin |
| 12~19 | G0 ~ G7 | 8-bit GREEN data pin |
| 20 | GND | power ground pin |
| 21~28 | B0 ~ B7 | 8-bit GREEN data pin |
| 29 | GND | power ground pin |
| 30 | PCLK | Pixel clock control pin |
| 31 | HSYNC | Horizontal synchronous signal control pin |
| 32 | VSYNC | Vertical synchronous signal control pin |
| 33 | DE | Data enable signal control pin |
| 34 | BL | LCD backlight control pin |
| 35 | TP_CS | Capacitor touch screen reset pin (resistance touch screen chip selection pin) |
| 36 | TP_MOSI | Data pin of IIC bus of capacitance touch screen (write data pin of SPI bus of resistance touch screen) |
| 37 | TP_MISO | Resistance touch screen SPI bus read data pin (capacitance touch screen not used) |
| 38 | TP_CLK | IIC bus clock control pin of capacitive touch screen (SPI bus clock control pin of resistance touch screen) |
| 39 | TP_PEN | Touch screen interrupt control pin (low level when touch is generated) |
| 40 | RST | LCD reset control pin (effective at low level) |
| Number | Pin name | Description |
| 1 | TP_SCL | IIC bus clock control pin of capacitive touch screen |
| 2 | TP_SDA | Data pin of IIC bus of capacitance touch screen |
| 3 | TP_PEN | Touch screen interrupt control pin (low level when touch is generated) |
| 4 | TP_RST | Capacitor touch screen reset pin(enable at low level) |
| 5 | GND | power ground pin |
| 6 | BL | LCD backlight control pin |
| 7 | DISP | LCD display enable pin (enable at high level, the module is not used) |
| 8 | DE | Data enable signal control pin |
| 9 | VSYNC | Vertical synchronous signal control pin |
| 10 | HSYNC | Horizontal synchronous signal control pin |
| 11 | PCLK | Pixel clock control pin |
| 12~19 | B7 ~ B0 | 8-bit BLUE data pin |
| 20~27 | G7 ~ G0 | 8-bit GREEN data pin |
| 28~35 | R7 ~ R0 | 8-bit RED data pin |
| 36 | GND | power ground pin |
| 37 | VCC3.3 | Power input pin(connect to 3.3V) |
| 38 | VCC3.3 | Power input pin(connect to 3.3V) |
| 39 | VCC5 | Power input pin(connect to 5V) |
| 40 | VCC5 | Power input pin(connect to 5V) |
Product Size:
How to connect the development board:
Packaging & Shipping & Delivery
Packaging Details:
All the products are packed in right way to keep it safe.
For small sizes of products we use tray + carton,
For bigger sizes we use foam slot + carton.
we also design packages according to customers' requirements
Shipping Details:
For small quantity orders: we ship by UPS Air-Express, or DHL/FEDEX/TNT/ EMS Express service, it is safe and fast.
For large quantity orders: we ship by buyer's cargo agent in China,
we can also ship by air or sea transportation by our cargo agent.
Delivery Details:
Ready-made Sample: within 1 week
Custom Sample: 1~2 weeks
Mass production: 3-4 weeks
Our Advantage:
☆Responsibility:
We take all responsibilities for any mistakes what we do make. We will remake all wrong pieces and ship out shortly.
☆Fast response:
Quickly realize your customized ideas, and have a sample ready in short time
☆Free Design:
We offer free design service depending on your ideas, logos, colors, etc.
Good knowledge of the displays market to put together solutions that add value and provide a unique proposition for the client
☆Efficient Communication:
Our sales are all with high English language skills, they are working so hard and efficient.
☆High Quality:
All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2008, ISO 14001:2004 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment
☆Quick Delivery (Production Time):
Ready-made Sample: within 1 week
Custom Sample: 1~2 weeks
Mass production: 3-4 weeks
Product Line:
☆ Clean Room class [email protected], Pressurec 0.8kgf
☆ Antistatic floor, resistance : 1x10 ohm to 1x10 ohm
☆ COG production lines: 4 .
☆ Backlight production lines: 2 .
☆ Existing machine capacity will be 1KK per month.
Quality Policy:
All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2008 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment
Certification:
FAQ:
Q: How can I get some samples?
A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount.
Q: What is the MOQ?
A: It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q: How do you control quality?
A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2008, ISO 14001:2004 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment0*480 CapacitouScreenCDsplay
Q: Does your product have any warranty?
A: Yes, we offer 12 months warranty for our products.
Q: What's your payment method?
A: Payment: T/T, Paypal, Western Union, etc.
For samples: payment in advance.
For mass production: 30% deposit and 70% balance before shipment.
Q: Do you offer custom solution?
A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.
){kind=link}